Floor Covering News and Information on all types of flooring

Flooring Information and News on all types of Flooring

To clean the surface, use a damp cloth or sponge and a mild soap or detergent. Difficult stains such as coffee or tea can be removed using a mild household cleaner and baking soda; mixing to achieve a paste consistency. Use a stiff nylon bristle brush, scrubbing (approx. 15-20 strokes) the affected area. Do not scrub so as to mar (damage, scratch) the surface finish.

Stubborn stains that resist any of the above cleaning methods may require the use of undiluted household bleach or nail polish remover. Use a cotton ball saturated with bleach or nail polish remover (acetone), gently rub the stain for up to two minutes. Rinse thoroughly with warm water and wipe dry using a soft cloth. This step may be repeated if the stain appears to be going away and the color of the laminate has not been affected.

WARNING: Prolonged exposure of the laminate surface to bleach will cause discoloration. Always rinse laminate surfaces after cleaning! Failure to rinse after cleaning can cause damage; even if a small amount of cleaning solution remains on the surface. A dry residue may be invisible; however, moisture from cups or drinks can reactivate it, and result in permanently etched scars or stains over time.

Recommended Household Cleaners:
  • Clorox®*
  • Formula 409®
  • Dawn®
  • Glass Plus®
  • Dow Bathroom Cleaner with Scrubbing Bubbles™
  • Fantastik®
  • Favor®
  • Windex®
  • Lestoil®
  • Pledge®
  • Grease Relief®
  • Lysol® Brand Disinfectant Basin / Tub / Tile Cleaner
  • Mr. Clean®
  • TOP JOB®
* Prolonged exposure can mar the surface

A Few Notes of Caution

Acidic or abrasive cleaners can damage laminate surfaces; do not use them. Drain cleaners containing lye will permanently damage the laminate surface. If you spill a drain cleaner, wipe it up immediately and rinse several times with water.

Hair, textile and food dyes can cause permanent stains. If dye should happen to spill, wipe it up immediately with dishwashing detergent or an all-purpose cleaner.

Understanding the Importance of Proper Cleaning and Care for Wilsonart Flooring

Wilsonart flooring is known for its durability, beauty, and versatility. Whether you have Wilsonart laminate, vinyl, or luxury vinyl flooring, it is essential to understand the importance of proper cleaning and care to maintain its longevity and appearance. Regular maintenance not only keeps your flooring looking its best but also helps to prevent damage and extend its lifespan.

One of the primary reasons why proper cleaning and care are crucial for Wilsonart flooring is to protect its surface from scratches, stains, and wear. While Wilsonart flooring is designed to be resistant to these issues, it is not entirely immune. Regular cleaning removes dirt, dust, and debris that can act as abrasives and cause scratches over time. Additionally, spills and stains should be promptly cleaned to prevent them from seeping into the flooring and causing permanent damage.

Another reason to prioritize cleaning and care is to maintain the beauty of your Wilsonart flooring. Over time, dirt and grime can dull the appearance of the flooring, making it look worn and lackluster. By regularly cleaning and caring for your Wilsonart flooring, you can preserve its vibrant colors and patterns, ensuring that it continues to enhance the aesthetic appeal of your space.

Expert Tips for Maintaining the Beauty and Longevity of Wilsonart Flooring

To help you maintain the beauty and longevity of your Wilsonart flooring, we have gathered some expert tips from professionals in the industry. These tips will not only ensure that your flooring remains in top condition but also save you time and money in the long run.

1. Use the right cleaning products: It is essential to use cleaning products specifically designed for Wilsonart flooring. Harsh chemicals and abrasive cleaners can damage the surface and strip away the protective layer. Look for pH-neutral cleaners that are safe for use on laminate, vinyl, or luxury vinyl flooring. Avoid using excessive water, as it can seep into the seams and cause swelling or warping.

2. Regularly sweep or vacuum: Dirt, dust, and debris can act as abrasives and cause scratches on your Wilsonart flooring. To prevent this, sweep or vacuum the floor regularly to remove loose particles. Use a soft-bristle broom or a vacuum cleaner with a soft brush attachment to avoid scratching the surface.

3. Wipe up spills immediately: Accidents happen, and spills are inevitable. However, it is crucial to clean up spills promptly to prevent them from staining or damaging your Wilsonart flooring. Use a soft, damp cloth or mop to wipe away the spill, and dry the area thoroughly to prevent moisture from seeping into the flooring.

4. Protect high-traffic areas: High-traffic areas, such as entryways or hallways, are more prone to wear and tear. To protect these areas, consider using rugs or mats. Place them strategically to catch dirt and debris before it reaches your Wilsonart flooring. Be sure to choose rugs or mats with non-slip backing to prevent accidents.

Step-by-Step Guide: How to Clean Wilsonart Flooring Like a Pro

Now that you understand the importance of proper cleaning and care for Wilsonart flooring, let’s dive into a step-by-step guide on how to clean it like a pro.

1. Start by removing loose dirt and debris: Sweep or vacuum the floor to remove any loose particles. Pay extra attention to corners and edges where dirt tends to accumulate.

2. Prepare a cleaning solution: Mix a small amount of pH-neutral cleaner with warm water according to the manufacturer’s instructions. Avoid using excessive amounts of water, as it can damage the flooring.

3. Mop the floor: Dip a soft mop or cloth into the cleaning solution and wring out any excess liquid. Mop the floor in small sections, working your way across the room. Be sure to rinse the mop or cloth frequently to avoid spreading dirt.

4. Dry the floor: After mopping, use a clean, dry cloth or mop to remove any excess moisture from the floor. This step is crucial to prevent water damage and ensure a streak-free finish.

Essential Dos and Don’ts: Expert Advice on Caring for Wilsonart Flooring

To wrap up our comprehensive guide on cleaning and caring for Wilsonart flooring, here are some essential dos and don’ts to keep in mind:

– Do clean up spills immediately to prevent staining or damage.
– Do use rugs or mats in high-traffic areas to protect the flooring.
– Do use pH-neutral cleaners specifically designed for Wilsonart flooring.
– Do sweep or vacuum regularly to remove dirt and debris.

– Don’t use abrasive cleaners or harsh chemicals that can damage the surface.
– Don’t use excessive amounts of water when cleaning, as it can cause swelling or warping.
– Don’t drag heavy furniture or objects across the flooring, as it can scratch or dent the surface.
– Don’t use steam mops or excessive heat, as it can damage the flooring.

In conclusion, proper cleaning and care are essential for maintaining the beauty and longevity of Wilsonart flooring. By following expert tips, using the right cleaning products, and adopting a regular cleaning routine, you can ensure that your Wilsonart flooring remains in top condition for years to come. Remember to protect high-traffic areas, promptly clean up spills, and avoid using harsh chemicals or excessive water. With proper care, your Wilsonart flooring will continue to enhance the aesthetic appeal of your space while providing durability and functionality.